Difference between revisions of "Waypoint Management"

From Rise: The Vieneo Province

(New page: The '''organizer''' is located on the bottom of your screen together with your inventory. The '''organizer''' plays a vital role in navigating in RISE. == Waypoint-tab == [[Image:Org-way...)
 
Line 24: Line 24:
 
## Click on ''Rename'' and enter a suitable name for the waypoint.
 
## Click on ''Rename'' and enter a suitable name for the waypoint.
 
  '''NOTE''' Method 3 is currently the only way you can save a waypoint with an altitude, the other 2 methods put the waypoint at 0m MSL
 
  '''NOTE''' Method 3 is currently the only way you can save a waypoint with an altitude, the other 2 methods put the waypoint at 0m MSL
 +
 +
The 3 other buttons on the waypoints tab have the following uses <br />
 +
'''Transmit''' -> Transmits a waypoint to the selected vehicle on scanner<br />
 +
'''Recieve''' -> Recieve a waypoint from vehicle within range<br />
 +
'''Delete''' -> Deletes the selected waypoint.<br />
 +
<br />
 +
== PODS-tab ==
 +
[[Image:Org-pod.JPG|PODS tab]]<br />

Revision as of 19:34, 18 March 2007

The organizer is located on the bottom of your screen together with your inventory. The organizer plays a vital role in navigating in RISE.

Waypoint-tab

Waypoint tab

Waypoints are used to store specific coordinates, it is very usefull to make waypoints of places you would want to visit again. There are 3 ways to make waypoints:

  1. Adding a waypoint by entering coordinates
    1. Click on the line that sais "Unused slot for temporary waypoints"
    2. Click on Enter
    3. Enter the coordinates (ex. S04.212 W026.066)
    4. Click on the line that now sais "Unsaved waypoint, hit RENAME to save it"
    5. Click on Rename and enter a suitable name for the waypoint.
  2. Adding a waypoint by entering APN Number
    1. Click on the line that sais "Unused slot for temporary waypoints"
    2. Click on Enter
    3. Enter the APN number (ex. APN35573144)
    4. Click on the line that now sais "Unsaved waypoint, hit RENAME to save it"
    5. Click on Rename and enter a suitable name for the waypoint.
  3. Adding a waypoint of your current location
    1. Click on the line that sais "Unused slot for temporary waypoints"
    2. Click on Mark
    3. Click on the line that now sais "Unsaved waypoint, hit RENAME to save it"
    4. Click on Rename and enter a suitable name for the waypoint.
NOTE Method 3 is currently the only way you can save a waypoint with an altitude, the other 2 methods put the waypoint at 0m MSL

The 3 other buttons on the waypoints tab have the following uses
Transmit -> Transmits a waypoint to the selected vehicle on scanner
Recieve -> Recieve a waypoint from vehicle within range
Delete -> Deletes the selected waypoint.

PODS-tab

PODS tab