Difference between revisions of "Waypoint Management"

From Rise: The Vieneo Province

Line 51: Line 51:
 
The vehicle tab shows all vehicles that you have scanned with thier respective info. The contents of this tab is saved if you close the viewscreen, so you can use this information later on.  
 
The vehicle tab shows all vehicles that you have scanned with thier respective info. The contents of this tab is saved if you close the viewscreen, so you can use this information later on.  
 
The vehicle tab contains the following info:<br />
 
The vehicle tab contains the following info:<br />
 +
{| class="infobox" border="1" cellpadding="2"
 +
! '''Vehicle Menu'''
 +
|-
 +
||IVR Number||Owner||Class||Registration||Location||Health||Armed?||Occupied?
 +
|-
 +
||IVR 53273||benjey||E-10||USV PAMELA||S 04.343 W 026.071||65% ||Armed ||Vacant
 +
|-
 +
||IVR 2134||benjey||C-2||IVR 2134||IVR 53273||100% ||Unarmed ||Vacant
 +
|-
 +
||IVR 2503||UNKNOWN||UNKNOWN||SEE REVS||S 04.194 W 026.096||100% ||Unarmed ||Vacant
 +
|}

Revision as of 20:22, 18 March 2007

The organizer is located on the bottom of your screen together with your inventory. The organizer plays a vital role in navigating in RISE.

Waypoint-tab

Waypoint tab

Waypoints are used to store specific coordinates, it is very usefull to make waypoints of places you would want to visit again. There are 3 ways to make waypoints:

  1. Adding a waypoint by entering coordinates
    1. Click on the line that sais "Unused slot for temporary waypoints"
    2. Click on Enter
    3. Enter the coordinates (ex. S04.212 W026.066)
    4. Click on the line that now sais "Unsaved waypoint, hit RENAME to save it"
    5. Click on Rename and enter a suitable name for the waypoint.
  2. Adding a waypoint by entering APN Number
    1. Click on the line that sais "Unused slot for temporary waypoints"
    2. Click on Enter
    3. Enter the APN number (ex. APN35573144)
    4. Click on the line that now sais "Unsaved waypoint, hit RENAME to save it"
    5. Click on Rename and enter a suitable name for the waypoint.
  3. Adding a waypoint of your current location
    1. Click on the line that sais "Unused slot for temporary waypoints"
    2. Click on Mark
    3. Click on the line that now sais "Unsaved waypoint, hit RENAME to save it"
    4. Click on Rename and enter a suitable name for the waypoint.
NOTE Method 3 is currently the only way you can save a waypoint with an altitude, the other 2 methods put the waypoint at 0m MSL

The 3 other buttons on the waypoints tab have the following uses:
Transmit -> Transmits a waypoint to the selected vehicle on scanner
Recieve -> Recieve a waypoint from vehicle within range
Delete -> Deletes the selected waypoint.

PODS-tab

PODS tab

The PODS tab of your organizer displays currently loaded and scanned PODS. Each line contains the following info:

PODS Menu
IVR Number Owner Type Content Ammount loaded Destination Location
POD000231 benjey Aux Fuel Iagerous 2378 Undeclared Bay 1
POD000400 raby Passenger N/A 00/20 Undeclared S 04.392 W 022.104
POD000364 rana Cargo Common 17/17 Undeclared IVR 53171

Currently the PODS list can be sorted by owner and serial number. Switch between the two with "Shift+S".

Vehicles-tab

PODS tab

The vehicle tab shows all vehicles that you have scanned with thier respective info. The contents of this tab is saved if you close the viewscreen, so you can use this information later on. The vehicle tab contains the following info:

Vehicle Menu
IVR Number Owner Class Registration Location Health Armed? Occupied?
IVR 53273 benjey E-10 USV PAMELA S 04.343 W 026.071 65% Armed Vacant
IVR 2134 benjey C-2 IVR 2134 IVR 53273 100% Unarmed Vacant
IVR 2503 UNKNOWN UNKNOWN SEE REVS S 04.194 W 026.096 100% Unarmed Vacant