Waypoint Management

The organizer is located on the bottom of your screen together with your inventory. The organizer plays a vital role in navigating in RISE.

Waypoint-tab

Waypoints are used to store specific coordinates, it is very usefull to make waypoints of places you would want to visit again. There are 3 ways to make waypoints:

1. Adding a waypoint by entering coordinates
   1. Click on the line that sais "Unused slot for temporary waypoints"
   2. Click on Enter
   3. Enter the coordinates (ex. S04.212 W026.066)
   4. Click on the line that now sais "Unsaved waypoint, hit RENAME to save it"
   5. Click on Rename and enter a suitable name for the waypoint.
2. Adding a waypoint by entering APN Number
   1. Click on the line that sais "Unused slot for temporary waypoints"
   2. Click on Enter
   3. Enter the APN number (ex. APN35573144)
   4. Click on the line that now sais "Unsaved waypoint, hit RENAME to save it"
   5. Click on Rename and enter a suitable name for the waypoint.
3. Adding a waypoint of your current location
   1. Click on the line that sais "Unused slot for temporary waypoints"
   2. Click on Mark
   3. Click on the line that now sais "Unsaved waypoint, hit RENAME to save it"
   4. Click on Rename and enter a suitable name for the waypoint.

NOTE Method 3 is currently the only way you can save a waypoint with an altitude, the other 2 methods put the waypoint at 0m MSL

The 3 other buttons on the waypoints tab have the following uses:
Transmit -> Transmits a waypoint to the selected vehicle on scanner
Recieve -> Recieve a waypoint from vehicle within range
Delete -> Deletes the selected waypoint.

PODS-tab

PODS tab

The PODS tab of your organizer displays currently loaded and scanned PODS. Each line contains the following info:

PODS Menu
IVR Number	Owner	Type	Content	Ammount loaded	Destination	Location
POD000231	benjey	Aux Fuel	Iagerous	2378	Undeclared	Bay 1
POD000400	raby	Passenger	N/A	00/20	Undeclared	S 04.392 W 022.104
POD000364	rana	Cargo	Common	17/17	Undeclared	IVR 53171

Currently the PODS list can be sorted by owner and serial number. Switch between the two with "Shift+S".

Vehicles-tab

PODS tab

The vehicle tab shows all vehicles that you have scanned with thier respective info. The contents of this tab is saved if you close the viewscreen, so you can use this information later on. The vehicle tab contains the following info:

Vehicle Menu
IVR Number	Owner	Class	Registration	Location	Health	Armed?	Occupied?
IVR 53273	benjey	E-10	USV PAMELA	S 04.343 W 026.071	65%	Armed	Vacant
IVR 2134	benjey	C-2	IVR 2134	IVR 53273	100%	Unarmed	Vacant
IVR 2503	UNKNOWN	UNKNOWN	SEE REVS	S 04.194 W 026.096	100%	Unarmed	Vacant