Display XML Format
From Rise: The Vieneo Province
Element
Component
Must be contained inside of an element. Multiple components are allowed in an element.
<Component busval="TvmDesiredClosingSpeed">...</Component> <Component busval="NormalAcceleration.y">...</Component>
Attributes
Bias, Modulation, Absolute only change the displayed value not the real value. All logic in condition is based off the original value.
busvalue
Floating Point Attributes
modulate
Multiplies the busvalue by the value specified
bias
Adds the value specified to the busvalue (after modulate operation, if applicable)
abs
Show absolute value of the number. Omitted or 0 is default and will show a negative sign for negative values.
Condition
Supported only for floating point values. Must be contained inside a component. Multiple conditions are allowed in each component. System only shows the first matching condition for a particular component.
<Condition>...</Condition> <Condition min="2">...</Condition> <Condition max="449.9">...</Condition> <Condition min="-8.4" max="8.4">...</Condition>
Attributes
- min - show content if the value is below this setting
- max - show content if the value is above this setting
Text
Must be contained inside a condition. Multiple text nodes can be used in each condition.
<Text x="0" y="0" color="ffff00ff" width="40" height="24" align="left">TVM velocity target: %+.3f km/s</Text> <Text x="0" y="0" color="ffff00ff" width="40" height="24" font="0">TVM velocity target: %+.3f km/s</Text> <Text x="0" y="0" color="ffff00ff" width="40" height="24" font="0">IVR: %S</Text>
Attributes
X and Y location attributes, Z depth (default is 1.0 which renders on top of everything else), color, width, and height.
font
Use an ID declared at the top. It will default to the font for the page, screen, etc.
align
The "align" attribute supports one of the values below. The default is "left". If "center" or "right" are specified then a width is required.
- left
- center
- right
valign
The "valign" attribute supports one of the values below. The default is "top". If "center" or "bottom" are specified then a height is required.
- top
- center
- bottom
Value
The value is a C++ string format ... you can have label text and or a format specifier for the associated bus value (component) and text after the format specifier (like units)
Full Format Specifiers Specification
Sprite
Must be contained inside a condition. Multiple text nodes can be used in each condition.
<Sprite x="0" y="0" z="0.9" width="421" height="320">Textures/Instruments/MFD-background.png</Sprite>
Attributes
- X and Y location attributes, Z depth (default is 0.0 which renders below everything else)
- color
- width, height, top (defaults to 0) and left (defaults to 0)
- xScale and yScale (defaults to 1.0)
Value
The value is the path (if it is relative it is from the program folder) to a image or bitmap.