Autoflyte: Difference between revisions
From Rise: The Vieneo Province
(New page: ==AutoFlyte== Flight Director is the first thing you will need to be able to turn on/off The Flight director is the 2 yellow bars the autopilot puts on the artificial horizon they show w...) |
No edit summary |
||
| Line 6: | Line 6: | ||
AutoFlyte engage/disengage is F10. you can fly the ship by hand using the AutoFlyte information displayed on the artificial horizon, or you can let the ship fly its self. | AutoFlyte engage/disengage is F10. you can fly the ship by hand using the AutoFlyte information displayed on the artificial horizon, or you can let the ship fly its self. | ||
C modes compass modes change | ===C modes=== | ||
compass modes change by pressing the "c" | |||
*ROL roll to flight bars | *ROL roll to flight bars | ||
*HDG heading to x degrees | *HDG heading to x degrees | ||
| Line 12: | Line 13: | ||
You can change the c mode targets with [ ] | You can change the c mode targets with [ ] | ||
V mode vertical modes | ===V mode=== | ||
vertical modes change by pressing the "v" | |||
*PIT pitch | *PIT pitch | ||
*V/S maintain that vertical speed | *V/S maintain that vertical speed | ||
Revision as of 20:57, 14 March 2007
AutoFlyte
Flight Director is the first thing you will need to be able to turn on/off The Flight director is the 2 yellow bars the autopilot puts on the artificial horizon they show were the autopilot thinks you should be heading. F to turn it on/off
AutoFlyte engage/disengage is F10. you can fly the ship by hand using the AutoFlyte information displayed on the artificial horizon, or you can let the ship fly its self.
C modes
compass modes change by pressing the "c"
- ROL roll to flight bars
- HDG heading to x degrees
- NAV fly to that fix
You can change the c mode targets with [ ]
V mode
vertical modes change by pressing the "v"
- PIT pitch
- V/S maintain that vertical speed
- MSL maintain x.x altitude
- AGL fly at x Above Ground Level
- IAS if Indicated air speed is above X climb If it is below descend
Change the V mode settings with ; /